JUKI LK-1900S-SS Instruction Manual page 49

(2) Setting the work hours
Set the work hours that is required to calculate the progress rate and the operation rate for the production
support function.
A B C D E
3) Setting the closing time of work hours
Press ITEM SELECT key
video.
Change the closing hour D (minute E) of work hours by pressing DATA CHANGE key
4) Determine the set values of work hours
The set values are determined by pressing EDIT key
Then, the screen returns to the production parameter setting screen.
❽ ❻ ❼
❻ to display the closing hour D (minute E) of work hours in the reverse
－
47
1) Calling the work hours setting screen
In the state where the work hours setting is
selected on the production parameter setting
screen, press EDIT key
The work hours setting screen is displayed A.
2) Setting the starting time of work hours
Press ITEM SELECT key
starting hour (minute C) of work hours B in the
reverse video.
Change the starting hour B (minute C) of work
hours by pressing DATA CHANGE key
❽ .
－
❽ .
❻ to display the
❼ .
❼ .