(2) How to use the communication function
This sewing machine is capable of inputting/outputting data by means of an USB thumb drive.
Name of data
Vector form data
A
B
C
❷
❽
❼
❻
❹
Extension
VD00 ××× .VDT
(××× : 001 to 999)
❼
❻
❼
❻
-
1) Entering the communication mode.
Press MODE key
screen. Put the pattern copy in the selected state
with ITEM SELECT key
❽ .
EDIT key
2) Selecting the type of communication.
Press DATA CHANGE key
the type of communication.
Description of data
Data on needle entry points created with
the PM-1. The data form is commonly used
among JUKI sewing machine.(User pattern)
3) Selecting the communication direction
Press ITEM SELECT key
pictograph A which shows the communication
direction selection.
Press DATA CHANGE key
communication direction.
: Data shown on the operation panel is
written on the USB thumb drive.
: Data stored on the USB thumb drive is
read into the operation panel.
4) Selecting the number.
Press ITEM SELECT key
No. B to be read.
Press DATA CHANGE key
file No. C to be written. Press set READY key
❷ to write the data in file No. C.
-
41
❹ to display the mode
❻ . Then, press
❼ to select
❻ to display
❼ to select the
❻ to select file
❼ to select