Do you have a question about the FT-0310 and is the answer not in the manual?
Questions and answers
Clare Sharp
February 15, 2025
Top left outdoor temperature showing dashes. Have reset everything and added new batteries etc but still no good. However bottom right is working on ch 1.
1 comments:
Mr. Anderson
February 15, 2025
The top left outdoor temperature on the Sainlogic FT-0310 may display dashes due to signal issues between the remote sensor and the display console. Possible reasons include: 1. The remote sensor is too far from the display console. 2. There is interference from electrical devices like computers or TVs. 3. The sensor needs time to stabilize (up to one hour). 4. The sensor is not positioned properly (e.g., blocked by obstacles).
Solutions: - Move the sensor closer to the console. - Reduce interference from electronic devices. - Allow time for the sensor to stabilize. - Ensure the sensor has fresh batteries.
Need help?
Do you have a question about the FT-0310 and is the answer not in the manual?
Questions and answers
Top left outdoor temperature showing dashes. Have reset everything and added new batteries etc but still no good. However bottom right is working on ch 1.
The top left outdoor temperature on the Sainlogic FT-0310 may display dashes due to signal issues between the remote sensor and the display console. Possible reasons include:
1. The remote sensor is too far from the display console.
2. There is interference from electrical devices like computers or TVs.
3. The sensor needs time to stabilize (up to one hour).
4. The sensor is not positioned properly (e.g., blocked by obstacles).
Solutions:
- Move the sensor closer to the console.
- Reduce interference from electronic devices.
- Allow time for the sensor to stabilize.
- Ensure the sensor has fresh batteries.
This answer is automatically generated