Table of Contents
Advertisement
Available languages
Available languages
16
www.euromasterbg.com
Faults
Trimmer does not
start to work
The engine start
but the knife does
not rotate.
Engine is turned off
suddenly.
Unusual noise.
Strong vibrations.
Unequal mowing.
Engine work
hard and reduce
turnovers.
If necessary, repair your trimmer is best carried out only by qualified experts in workshops
on GREEN TOOLS, which used only original spare parts. Thus ensuring their safe operation.
7. Environmental protection. Do not dispose of waste electrical equipment in
domestic waste! In order to protect the environment and Directive 2002/96/EC,
they must be collected separately and be subjected to appropriate processing for
recovery of the information contained in these materials.
Product Features:
1. Lever of the switch.
2. Power cord.
3. Main handle.
4. Housing
5. Auxiliary handle.
6. Electric motor.
7. Fuse.
8. Cord head.
Removal
Power cable is not connected or
damaged
Trimmer is in a tall grass.
It is possible that the trimmer is
fuzzy and the blade is blocked.
The power plug is withdrawn
Bolt of the blade is loose or
connections between fasteners.
Distorted and damaged knife.
The grass is very high.
The blade is blunt.
It is possible that the trimmer is
fuzzy and blocked
The blade can be installed
incorrectly.
Reasons
Check cable. If necessary, replace it.
Upon initial release always put the
trimmer in the grass
Disconnect the plug and check it. Put
on your protective gloves and clean the
knife and release
Check cable. Make sure it is well
enshrined in the device (14) and plug
it again.
Fasten the parts.
Immediately stop the trimmer and
replace the knife in a specialized
service.
Increase mowing height.
Replace or tipped knife. .
Look underneath the trimmer and clean
it. Work always with protective gloves.
Check.
Advertisement
Table of Contents
