Supermicro X13SEI-TF User Manual page 97

Media Detect Count
Use this feature to select the wait time (in seconds) for the BIOS ROM to detect the presence
of a LAN media either via the Internet connection or via a LAN port. Press <+> or <-> on
your keyboard to change the value. The default setting is 1.
MAC:xxxxxxxxxxxx-IPv6 Network Configuration
MAC:xxxxxxxxxxxx-IPv6 Network Configuration
Enter Configuration Menu
The following information is displayed:
Interface Name / Interface Type / MAC address / Host addresses / Route Table / Gateway
addresses / DNS addresses
Interface ID
Use this feature to set the 64-bit alternative interface ID for the device.
DAD Transmit Count
If this set feature is set to 0, the Duplication Address Detection is not performed. Set the
value to a preferred selection.
Policy
Use this feature to set the policy to automatic or manual. The options are automatic
and manual.
Advanced Configuration (Available when "Policy" is set to manual)
New IPv6 address
Use this feature to enter the IPv6 address for the local machine.
New Gateway addresses
Use this feature to set the gateway address for the local machine.
New DNS addresses
Use this feature to set the DNS server address for the local machine.
Commit Changes and Exit
Press <Enter> to save changes and exit. The options are Yes and No.
Discard Changes and Exit
Press <Enter> to discard changes and exit. The options are Yes and No.
97
Chapter 4: UEFI BIOS