Supermicro X13SEI-TF User Manual page 55

LAN Port Enable/Disable
Use JPL1 to enable or disable the I210 LAN1 port (for X13SEI-F). Use JPL2 to enable or disable
the I210 LAN2 port (for X13SEI-F). Use JPL3 to enable or disable the X550 LAN1 and LAN2
ports (for X13SEI-TF). The default setting is Enabled.
Management Engine (ME) Recovery
Use jumper JPME1 to select ME Firmware Recovery mode, which will limit resource allocation for
essential system operation only in order to maintain normal power operation and management.
In the single operation mode, online upgrade will be available via Recovery mode. Refer to the
table below for jumper settings.
MH4
BMC
LEDBMC
MH13
1 2
MH10
4
3
LED4
JM2_1
MH5
MH9
PCH
C741
JSD2
JSD1
CMOS CLEAR
JSEN1
MH3
JL1
FANB FANA
CHASSIS INTRUSION
LAN Port Enable/Disable
Jumper Settings
Jumper Setting
Pins 1-2
Pins 2-3
ME Recovery Mode
Jumper Settings
Jumper Setting
Pins 1-2
Pins 2-3
LED6
JUIDB1
VGA
MH2
X550
LAN2 LAN1
CPU
MH11
MH12
BT1
JM2_2
BAR CODE MAC CODE
IPMI CODE SAN MAC
X13SEI-TF
JBT1
REV:1.01
DESIGNED IN USA
JF1
JNVI2C1
BIOS LICENSE MH6
FAN4 FAN3
LEDPWR
JRK1
JSTBY1
Header for 5V STBY power
Definition
Enabled (Default)
Disabled
Definition
Normal (Default)
ME Recovery
1. JPL1
USB4/5 2. JPL2
(3.2 Gen 1)
USB0/1
BMC_LAN
MH1
3. JPL3
4. ME Recovery
MH8
JPWR2
MH7
FAN2 FAN1
JPI2C1
55
Chapter 2: Installation