NIC Configuration
Link Speed
Wake On LAN
If this feature is set to Enabled, the LAN port you specified will be enabled when the system
is powered on. The options are Disabled and Enabled.
Blink LEDs
Use this feature to identify the physical network port by blinking the associated LED. The
default setting is 0 (up to 15 seconds).
The following information is displayed:
•
UEFI Driver
•
Adapter PBA
•
Device Name
•
Chip Type
•
PCI Device ID
•
PCI Address
•
Link Status
•
MAC Address
•
Virtual MAC Address
TLS Authenticate Configuration
This submenu allows you to configure Transport Layer Security (TLS) settings.
Server CA Configuration
This feature allows you to configure the client certificate that is to be used by the server.
Enroll Certification
This feature allows you to enroll the certificate in the system.
Enroll Certification Using File
This feature allows you to enroll the security certificate in the system by using a file.
105
Chapter 4: UEFI BIOS