Supermicro X13SEI-TF User Manual page 50

Super X13SEI-TF/-F User's Manual
NC-SI Header for IPMI Support
A Network-Controller Sideband Interface (NC-SI) header is located at JNCSI1 on the
motherboard. For remote management, connect the appropriate cable from this header
to an add-on card to provide the out-of-band (sideband) connection between the onboard
Baseboard Management Controller (BMC) and a Network Interface Controller (NIC). For the
network sideband interface to work properly, you will need to use a NIC add-on card that
supports NC-SI and also need to have a special cable. Please contact Supermicro at
supermicro.com to purchase the cable for this header.
Note: For detailed instructions on how to configure Network Interface Card (NIC) set-
tings, refer to the Network Interface Card Configuration User's Guide posted on the
web page under the link: http://www.supermicro.com/support/manuals/.
NVMe I C Header
2
Connector JNVI C is a management header for the Supermicro AOC NVMe PCIe peripheral
2
cards. Connect the I C cable to this connector.
2
MH4
BMC
LEDBMC
MH13
1
MH10
LED4
JM2_1
MH5
MH9
PCH
C741
JSD2
JSD1
CMOS CLEAR
JSEN1
MH3
JL1
FANB FANA
CHASSIS INTRUSION
LED6
JUIDB1
VGA
MH2
X550
LAN2 LAN1
CPU
MH11
MH12
BT1
JM2_2
BAR CODE MAC CODE
2
IPMI CODE SAN MAC
X13SEI-TF
JBT1
REV:1.01
DESIGNED IN USA
JF1
JNVI2C1
MH6
BIOS LICENSE
FAN4 FAN3
LEDPWR
JRK1
JSTBY1
Header for 5V STBY power
1. NC-SI Connector
2. NVMe I²C Header
USB4/5
(3.2 Gen 1)
USB0/1
BMC_LAN
MH1
MH8
JPWR2
MH7
FAN2 FAN1
JPI2C1
50
www.