Event Logs - Supermicro X13SEI-TF User Manual

4.4 Event Logs

Use this menu to configure Event Log settings.
Note: The changes take effect after you press Save Changes and Exit, Save Changes
and Reset, or Save Changes in the Save and Exit submenu.
Change SMBIOS Event Log Settings
Enabling/Disabling Options
SMBIOS Event Log
Select Enabled to enable System Management BIOS (SMBIOS) Event Logging during system
boot. The options are Disabled and Enabled.
Erasing Settings
Erase Event Log (Available when "SMBIOS Event Log" is set to Enabled)
Select "No" to keep the event log without erasing it upon next system bootup. Select "Yes,
Next Reset" to erase the event log upon next system reboot. The options are No, (Yes, Next
reset), and (Yes, Every reset).
When Log is Full (Available when "SMBIOS Event Log" is set to Enabled)
Select Erase Immediately to immediately erase all errors in the SMBIOS event log when the
event log is full. Select Do Nothing for the system to do nothing when the SMBIOS event log
is full. The options are Do Nothing and Erase Immediately.
107
Chapter 4: UEFI BIOS