Supermicro X13SEI-TF User Manual page 116

Super X13SEI-TF/-F User's Manual
Enter Audit Mode (Available when "Secure Boot Mode" is set to

Custom)
Select Ok to enter the Audit Mode workflow. It will result in erasing of Platform Key (PK)
variables and reset system to the Setup/Audit Mode.
Key Management (Available when "Secure Boot Mode" is set to

Custom)
The following information is displayed.
•
Vendor Keys
Provision Factory Defaults
Select Enabled to install provision factory default settings after the platform reset while the
system is in the Setup Mode. The options are Disabled and Enabled.
 Restore Factory Keys
Select Yes to restore manufacturer default keys used to ensure system security. The
options are Yes and No. Select Yes will reset system to the Deployed mode.
Reset To Setup Mode (Available when any secure keys have been
installed)
This feature resets the system to the Setup Mode. The options are Yes and No.

Enroll Efi Image
This feature allows the image to run in the secure boot mode. Enroll SHA256 Hash
certificate of a PE image into the Authorized Signature Database (DB).
Export Secure Boot variables (Available when any secure keys have
been installed)
This feature exports the NVRAM contents of secure boot variables to a storage
device.
Device Guard Ready
Secure Boot variable / Size / Keys / Key Source
116