Compaq SW3322 User Manual page 82

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-12 Configuring and Monitoring the Switch
To configure the forwarding table, do the following:
1. Select Switch Configuration Menu from the Main Menu.
2. Select Forwarding Table Configuration Menu.
To either make an existing dynamic entry static (Make Entry Static) or delete a
static entry (Delete Static Entry), do the following:
1. Select the letter associated with the option.
2. Enter the MAC address. Press <Enter>.
To either add a static entry (Add Static Entry) or modify a static entry (Modify
Static Entry), do the following:
1. Select the letter associated with the option.
2. Enter the MAC address. Press <Enter>.
3. Do one of the following:
The following message prompt displays:
Enter MAC Address:
The following message prompt displays:
Enter MAC Address:
The following message prompt displays:
Forward to Port (Y/N):
a. If you select "Y" and Press <Enter>, the system displays:
Enter Port Number (1-26):
Enter the port number and press <Enter>.
b. If you select "N" and press <Enter>, the system displays "discard" in
the Disposition field.