Downloading Via Tftp - Compaq SW3322 User Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
When the XMODEM procedure finishes, the following message prompt
displays:
The system software will reinitialize and display the login prompt.

Downloading Via TFTP

To perform a TFTP download, you must first configure the switch. This
consists of programming the switch with an IP address, if this has not already
been done, and entering the IP address of the TFTP server and the name of the
upgrade file. To program the switch IP address, go to the System Configuration
Menu that is accessible from the Main Menu screen.
To download switch software via TFTP, do the following:
1. Select TFTP Server IP Address from the Download Software Menu.
2. Enter the TFTP server IP address and press <Enter>.
3. Select TFTP File Name and enter the file name to be downloaded from
4. If necessary, configure the address of an IP gateway to reach the server
5. Configure the TFTP server by copying the download file from the
6. Select Start TFTP Download and press <Enter>.
Software download successfully completed XMODEM download.
Please wait while program flash is being written. Software
downloader is exiting after successful download to flash.
Please wait while system initializes.
the TFTP server.
NOTE: For a TFTP download, the path to the file must be included in its name.
For example, if the upgrade file name is switch.bin and it resides in the directry/
usr/tftp on the TFTP server, then you must enter the TFTP file name as
"/usr/tftp/switch.bin".
from the switch using the Default Gateway field on the System
Configuration Menu.
upgrade disk to an appropriate directory and starting the server.
Compaq SW3322/SW3323/SW3324 Dual-Speed Switch User Guide
4-7