Table of Contents
Advertisement
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The port LEDs are grouped to the left of their corresponding RJ-45 ports. Table
1-2 defines the performance of the port LEDs for the 10Base-T/100Base-TX
ports in the default configuration.
Name
Gigabit Ethernet Ports
RJ-45 Ports
Default Configuration
RJ-45 LED mode
button pressed
Fiber Ports (SW3323) with
fiber card pre-installed
Table 1-2
Port LEDs Defined
L LED On: Indicates a valid connection (link) on the associated port.
L LED Off: Indicates no link on the associated port.
A LED flashing: Indicates the presence of transmit and/or receive activity.
A LED Off: Indicates the absence of transmit or receive activity.
L LED On: Indicates a valid connection (link) on the associated port.
L LED Off: Indicates no link on the associated port.
A LED flashing: Indicates the presence of transmit and/or receive activity.
A LED Off: Indicates the absence of transmit or receive activity.
L LED On: Port is in the full duplex mode.
L LED Off: Port is in the half duplex mode.
A LED On: Indicates the port is in the 100Base-TX mode.
A LED Off: Indicates the port is in the 10Base-T mode.
Link LED On: Indicates a valid connection (link) on the associated port.
Link LED Off: Indicates no link on the associated port.
Activity LED flashing: Indicates the presence of transmit and/or receive activity.
Activity LED Off: Indicates the absence of transmit or receive activity.
Function
Compaq SW3322/SW3323/SW3324 Dual-Speed Switch User Guide
1-7
Advertisement
Table of Contents
