Table of Contents
Advertisement
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-4
Installation
1. Mount one of the ears to the switch using two (2) of the supplied screws.
2. Slide the switch into the rack and align the holes in the rack mounting
3. Insert and tighten appropriate rack-mounting screws (not provided).
Figure 2-1 Mounting the Switch in a Rack
Repeat this step for the other side of the switch.
ears with the holes in the rack rails.
WARNING: To reduce the risk of personal injury or damage to the
!
equipment, be sure each rack is level and stable. Rack frames should be
coupled together or otherwise secured to the building structure to maintain
stability. This must be accomplished before performing any work on the rack.
Advertisement
Table of Contents
