Global BH-9982 Instruction Manual page 148

6. ASSEMBLY
I
139
1) Insert the wicks (46) and (47) into the hole in
the bed as far as they will go.
2) Push the two felts (48) into the positions shown
in the illustration.
3) Insert the four wicks mentioned below into the
bed hole (h).
・ Thin wick (i) coming from sub tank assembly
(40)
・ Wick (6) and wick (8) (j) of "6-11. Looper
mechanism"
・ Wick (4) (k) of "6-12. Spreader mechanism"
4) Push the felt (49) into the bed hole (h).
5) Secure the oil tubes with the tube support B
(50).
RH-9820
1038B
1039B
1040B