Enter the static IP address, subnet mask, and gateway. Ask the network
administrator for this information. The SMC requires a static IP address; it
cannot have a dynamic address (that is, an address assigned by a DHCP
server).
1. In the Adapter box of the Microsoft TCP/IP Properties dialog box (Figure 5–
6), select adapter 1.
2. Select the option button labeled Specify an IP address. Enter the IP address,
subnet mask, and gateway. Click OK.
NOTE: The network card shown in Figure 5–6 is an example only. Another type
of network card might be supplied.
Configuring the SMC Software
5-9