Compaq GS320 Installation And User Manual page 187

1. In the Current Partition Map screen click Next. The Work with Partition
Maps screen displays (Figure 9–17).
2. Select the option button labeled Load and modify an existing partition
map. Enter the file name of a partition map that has been saved to a file
(see Section 9.4.5) in the Partition Map box, or click the Browse button to
find the file. The default file extension is .PMF.
NOTE: If you are running CAPM from a location other than the SMC
system, the partition map file must be in the Maps folder on the
SMC system (C:\SMC\CAPM\MAPS).
3. Click Next. The Create/Modify a Partition Map screen displays. From this
screen you can perform any of the procedures in Sections 9.4.2 through
9.4.5.
CAPM does not validate the partition map file when it loads. To ensure that
the map is valid, click the Validate button in the Create/Modify a Partition Map
screen. (See Section 9.4.5.)
Compaq AlphaServer Partition Manager 9-23