Compaq GS320 Installation And User Manual page 161

You can save the configuration to a Zip disk or floppy disk, or to the D drive on
the SMC or a network drive.
Saving the Configuration
1. If ConsoleWorks is running, shut it down.
2. From the Start menu select Programs|Windows NT Explorer.
3. In the Exploring window select C:\Cwks\Config (Figure 8–41).
4. From the Edit menu select Copy.
5. If you are saving the configuration to a Zip disk or a floppy disk, insert the
disk in the drive.
6. In the Exploring window select the Zip, floppy, D, or network drive and the
location to which you want to save.
7. From the Edit menu select Paste.
8. If you created any actions, repeat steps 3 through 7 for the Actions folder.
9. If you saved to a disk, remove the disk from the drive and label it
"ConsoleWorks Configuration."
Restoring the Configuration
1. If you saved to a disk, insert the ConsoleWorks Configuration disk in the
Zip drive or floppy drive.
2. From the Start menu select Programs|Windows NT Explorer.
3. In the Exploring window select C:\Cwks\Config. Delete the Config folder.
4. In the Exploring window select the Config folder on the Zip, floppy, D, or
network drive.
5. From the Edit menu select Copy.
6. In the Exploring window select C:\Cwks.
7. From the Edit menu select Paste.
8. If you also saved actions, repeat steps 3 through 7 for the Actions folder.
9. If you are working with a removable disk, remove it from the drive.
ConsoleWorks 8-59