Safety Instructions; Disabling The Safety System; Switching To A Wired System - infaco ELECTROCOUP F3015 Instructions Manual

SAFETY INSTRUCTIONS

During actions which do not involve pruning, the pruning shears should always
be kept in the closed position, disconnected from the battery and placed in the
holster.
For all other safety instructions regarding the use of the device, please refer to the
F3015 user manual.
REGARDLESS OF THE CIRCUMSTANCES OF USE
AND WITH OR WITHOUT THE DSES WIRELESS
SAFETY SYSTEM, USERS MUST ENSURE THAT
THE FREE HAND IS KEPT AT LEAST 7.9" (20 CM)
AWAY FROM THE BLADE OF THE TOOL EXCEPT
DURING CALIBRATION.

Disabling the safety system

At the customer's request, the safety system can be enabled and disabled by
Infaco USA and its Authorized Service Providers.

SWITCHING TO A WIRED SYSTEM

This system can be replaced by a hard-wired system.
This modifi cation can be done by Infaco USA and its Authorized Service Providers.
The change will disable the WIRELESS safety system.
17
7.9" (20 cm)