Push-To-Talk; Speed Dial 100; Speed Dial 8 - Polycom IP 500 User Manual

Extended Functionality
1.
GO OFF HOOK
2. Press *07.

Push-to-Talk

Provides intercom-like functionality. This feature allows a user to dial another station where the system will request
the destination station to automatically answer. For this feature to work (called station automatically answers via the
speakerphone), the called station must support an enhanced calling protocol. The calling station must also be in the
called party's Push-to-Talk allowed access list.
Using the Feature
Activate: Using the Feature Code
1. Pick up HANDSET, press the
2. Dial *50.
3. Dial the extension of the phone you want to intercom.
Extended Functionality
Program a Speed Dial 8 number to quickly place an intercom call.

Speed Dial 100

Allow a user to use a feature code and 2 digits to complete a call.
Using the Feature
Configure
1.
GO OFF
2. Press *75. You will hear a stuttered dial tone then a normal dial tone.
3. Using the
with it and then press the
4. The
IVR
Use
1.
GO OFF
2. Press
*3
3. Press the Speed Dial 100 Codes 00-99.

Speed Dial 8

Allow a user to hit only one button to complete a call.
Using the Feature
Configure
1. GO OFF
2. Press *74. You will hear a stuttered dial tone then a normal dial tone.
VoicePipe Communications
Get user manuals: See SafeManuals.com
NEWCALL
You will hear a stuttered dial tone then a normal dial tone.
HOOK.
Enter the Speed Dial 100 Code
KEYPAD
key.
#
will notify you whether or not the programming was successful.
HOOK.
HOOK.
IP 500/501 User Guide
soft key, or press the SPEAKERPHONE
plus the
00-99 NUMBER
Polycom IP 500/501 User Guide
KEY.
you want to associate
Page 12 of 13