Caller Id Blocking Per Call; Caller Id Delivery Per Call; Dialing; Do Not Disturb - Polycom IP 500 User Manual

Caller ID Blocking Per Call

Allow users to block their caller ID on a call-by-call basis.
Using the Feature
1.
GO OFF
2. Press *67. You will hear a stutter dial tone then a normal dial tone.
3. Dial the

Caller ID Delivery Per Call

Allow users to deliver their caller ID on a call-by-call basis when they have turned on the Caller ID Blocking feature
within the VoicePipe Web Portal.
Using the Feature
4. GO OFF
5. Press *65. You will hear a stutter dial tone then a normal dial tone.
6. Dial the

Dialing

Allow a user to make a call.
Using the Feature
Placing a Call
1. Pick up HANDSET, press the
2. Enter the number you wish to call.
3. Press the
Extended Functionality
Placing a Call
1. Dial the
2. Press the

Do Not Disturb

Allow users to set their station as unavailable so that incoming calls are given a busy treatment. Depending on how
the user has set up their busy treatment, the callers will be directed to voicemail or forwarded to another line.
NOTE: The user must use the same method to turn the function off that they used to turn the function on.
Otherwise, the system will not recognize the 'off' command.
Using the Feature
Activate: Using the Phone's Keys
1. Press the
VoicePipe Communications
Get user manuals: See SafeManuals.com
HOOK.
of the party you wish to call.
NUMBER
HOOK.
NUMBER of the party you wish to call.
NEWCALL
soft key, or wait to connect.
SEND
NUMBER you wish to call using the KEYPAD.
DIAL soft key.
†
button.
DO NOT DISTURB
IP 500/501 User Guide
soft key, or press the
SPEAKERPHONE
Polycom IP 500/501 User Guide
KEY.
Page 10 of 13