Set The Top-Of-Form - Printronix P5000 Series Setup Manual

Set the Top-of-Form

Following are instructions for setting the top-of-form after you have powered
on the printer.
Paper Path
Figure 37. The Lower Paper Guide
1. When you start this procedure, verify that the printer is in offline mode,
with the printer cover open and the forms thickness lever lowered.
2. Press the FF key several times to ensure the paper feeds properly
beyond the tractors and over the lower paper path. Ensure the paper folds
in the same way in the stacking area as it does in the supply area.
Set the Top-of-Form
45