Graphics Options - Printronix P5000 Series Setup Manual

Chapter 4
IGP/VGL Emulation
Power Up ^F
•
Disable. The default.
•
Enable. Selects free format mode as the power-up default, and selects
the graphics mode ^PY as the power-up default. Free format causes the
IGP/VGL to ignore carriage returns, line feeds and all characters below
hex 20 sent from the host.
Power Up ^PY
•
Disable. The default.
•
Enable. Selects the graphics mode ^PY as the power-up default.
LPI
The number of lines to be printed per inch. For example, at 6 lpi there is 1/6
inch from the top of one print line to the top of the next print line.

Graphics Options

Following are several options which configure printing output.
Slash 0
This parameter allows you to print the numeral "0" with or without the slash.
This option applies to all character sets except OCR-A and OCR-B.
•
Disable. Zero is printed without a slash.
•
Enable. Zero is printed with a slash.
Ignore Dots
•
Disable. The default.
•
Enable. Causes the IGP/VGL to expect position values to be specified in
only 1/10ths of an inch. If the dot position is also given, it is treated as
text.
Append Rotated
•
Disable. Logos and alphanumeric strings are treated as separate
elements.
•
Enable. Appends logos to an alphanumeric string rotated in a clockwise,
counterclockwise, or inverted orientation.
Truncate Alpha
When enabled, this parameter prevents the printing of Error 48 (Element Off
Page Error) if alphanumeric data, including spaces, extends beyond the right
side of the form.
96