RIBBONMINDER
RibbonMinder™ monitors ink consumption to ensure quality printing. The
"RibbonMinder" chapter explains how to use this feature and its options in
more detail.
RIBBON
MINDER
New Ribbon
Ribbon Action
Press ENTER
Disable*
to reset ribbon
Display
life to 100%. A
Fault
new ribbon
must be
installed after
setting the
ribbon life to
100%.
New Ribbon
Whenever you install a new ribbon, you must reset the ribbon life to 100%.
Use the New Ribbon option to reset the ribbon display.
Ribbon Action
This option allows you to perform three functions:
•
activate the RibbonMinder ink consumption display
•
disable the ink consumption display
•
flash a fault message when the display reaches 0%
Displaying the ribbon ink consumption allows you to monitor the percentage
of ink left in the ribbon. Disabling the ink consumption monitor removes the
visual display, but allows RibbonMinder to continue monitoring how much ink
is left in the ribbon. The Fault option activates a flash message when the
display reaches 0%. The default is disable.
Ribbon Size
Ribbon Adjust
60 yards*
0%*
(1-255)
(-99% to 99%)
To view options, press:
To select an option, press ENTER.
To return to main menu, press
CLEAR.
To exit menu, press ONLINE.
* = Default Setting
Parallel Submenu
Fault Action
New Ribbon*
Do Nothing
⇓
Down
⇑
Up
⇒
Next
⇐
Prev
117