Platform Caught Overhead; Righting Of Tipped Machine; Post-Incident Inspection; Incident Notification - JLG 1930ES Operation And Safety Manual

Platform Caught Overhead

If the platform becomes jammed or snagged in overhead
structures or equipment, do not continue operation of the
machine from either the platform or the ground until the
operator and all personnel are safely moved to a secure
location. Only then should an attempt be made to free the
platform using any necessary equipment and personnel. Do
not operate controls to cause one or more wheels to leave
the ground.

Righting of Tipped Machine

A forktruck of suitable capacity or equivalent equipment
should be placed under the elevated side of the chassis, with
a crane or other suitable lifting equipment used to lift the
platform while the chassis is lowered by the forklift or other
equipment.

Post-Incident Inspection

Following any incident, thoroughly inspect the machine and
test all functions first from the ground controls, then from the
platform controls. Do not lift above 10 feet (3 meters) until
you are secure that all damage has been repaired, if
required, and that all controls are operating correctly.
3121165
SECTION 5 - EMERGENCY PROCEDURES
5.3

INCIDENT NOTIFICATION

It is imperative that JLG Industries, Inc. be notified immedi-
ately of any incident involving a JLG product. Even if no
injury or property damage is evident, the Product Safety and
Reliability Department at the factory should be contacted by
telephone and provided with all necessary details.
Contact at 1-877-JLG-SAFE (554-7233) between the hours of
8:00 AM - 4:45 PM Eastern Standard time.
It should be noted that failure to notify the Manufacturer of an
incident involving a JLG Industries product within 48 hours of
such an occurrence may void any warranty consideration on
that particular machine.
– JLG Lift – 5-3