Table of Contents
Advertisement
•
Be aware of buried, hidden or other hazards in your
work environment. Do not contact or damage cords,
conduits, pipes or hoses that may contain electrical
wires, explosive gases or harmful liquids.
•
Keep others a safe distance from your work area, or
ensure they use appropriate Personal Protective
Equipment.
•
Keep hands, loose clothing, long hair and jewelry away
from working end of tool.
•
Power tools can vibrate in use. Vibration, repetitive
motions or uncomfortable positions may be harmful to
your hands and arms. Stop using any tool if discomfort,
tingling feeling or pain occurs. Seek medical advice
before resuming use.
•
Keep body stance balanced and firm. Do not overreach
when operating this tool. Anticipate and be alert for
sudden changes in motion, reaction torques, or forces
during start up and operation.
•
Tool and/or accessories may briefly continue their
motion after throttle is released.
The use of other than genuine Ingersoll–Rand replacement parts may result in safety hazards, decreased tool performance, and
increased maintenance, and may invalidate all warranties.
Repairs should be made only by authorized trained personnel. Consult your nearest Ingersoll–Rand Authorized Servicenter.
WARNING
This is the safety alert symbol.
It is used to alert you to potential
personal injury hazards. Obey all
safety messages that follow this
symbol to avoid possible injury
or death.
Form P7715 Edition 1
USING THE TOOL (Continued)
WARNING SYMBOL IDENTIFICATION
Always wear eye protection
when operating or performing
maintenance on this tool.
AGENCY SYMBOL IDENTIFICATION
European Community Mark
•
To avoid accidental starting - ensure tool is in "off"
position before applying air pressure, avoid throttle
when carrying, and release throttle with loss of air.
•
Ensure work pieces are secure. Use clamps or vises to
hold work piece whenever possible.
•
Do not carry or drag the tool by the hose.
•
Do not use power tools when tired, or under the
influence of medication, drugs, or alcohol.
•
Never use a damaged or malfunctioning tool or
accessory.
•
Do not modify the tool, safety devices, or accessories.
•
Do not use this tool for purposes other than those
recommended.
•
Use accessories recommended by Ingersoll-Rand.
•
Use only impact sockets and accessories. Do not use
hand (chrome) sockets or accessories.
•
Impact wrenches are not torque wrenches. Connections
requiring specific torque must be checked with a torque
meter after fitting with an impact wrench.
•
This tool is not designed for working in explosive
atmospheres.
•
This tool is not insulated against electric shock.
WARNING
WARNING
Always wear hearing
protection when operating
this tool.
Indicates compliance with
relevant EC directives.
2
WARNING
Read this manual before
operating tool.
Advertisement
Table of Contents
