Groups - E-Mu ProteusX Operation Manual

5 - Preset Editor
Voices & Sample Zones
Expand/Collapse Multisample
Multisamples allow you to place multiple samples under the same set of synthesizer voice
parameters.
The multisample key range sets the overall key range limit for the samples in the multi-
sample. In the diagram above, the top sample won't be played, because its key range is
outside the limit of the Multisample key range.

Groups

Voices can be categorized into Groups as a way to organize and select similar voices, say
a layer of piano voices and a layer of string voices, into unified entities.
You can create a temporary group if you want to edit several voices. Grouping the voices
and then selecting the group is faster and more dependable than manually selecting
each voice when editing.
To Place a Voice into a Group
Tag each voice you want to be in the group with the same group number. This can
1.
be done in the "Voices and Zones" window or from the "Voice Editor" window.
Whenever you select that group number in the Voice Editor screen, all voices with
2.
that group number will be selected. You can define up to 99 groups, but a voice can
only be in one group at a time.
To Make a New Group from the Currently Selected Voices
Select the voices you want to be in the new Group from the "Voices & Zones" page.
1.
Select New Group from the Preset menu. A new group will be created using the
2.
lowest available group number.
To Select All Voices for Editing
• From the "Voices & Sample Zones" window, press Control-A.
• From the "Synth Editor" window, select "All" in the Group box.
To Select a Group of Voices for Editing
• Method #1: Simply select the desired group number from the Voice Processing
page. Once you have selected a group, you will be editing all the voices in this
group.
• Method #2: Select any voice in the group, then select Select Group "N" from the
Preset menu. All the voices in the group will be selected.
62
Multisample Key Range
Individual Sample Key Ranges
Proteus X Operation Manual