E-Mu ProteusX Operation Manual page 37

Open the preset "And Voice" by clicking on the plus (+) sign next to the folder.
5.
Next, click on the Voices & Zones icon. The Key Window appears. The blue bars
6.
show that the two multisamples in this preset are mapped across the entire
keyboard.
Click on the Mix/Tune tab at the top of the window.
7.
There are two multisampled voices in this preset. Adjust the volume slider for each
8.
of the voices as you play. Now try playing with the pan position and transpose.
Before you leave this window, turn up the volume controls on both voices.
Exploring the Key and Velocity Windows
Click the Key Win tab again.
1.
Click and drag the ends of the blue bars so they look something like the screen
2.
shown above. The settings don't have to be exact.
Play the keyboard from the lowest key to the highest. Voice 1 plays at the low end of
3.
the keyboard and voice 2 plays on the high keys.
To return both voices to their original positions, select Edit, Undo from the toolbar.
4.
Select Undo again until both voices are assigned to the entire keyboard.
Velocity Switching and Crossfading
Click on the Val Win tab. The following window appears:
5.
This screen controls the voices using key velocity or how hard the keys are played.
6.
Set the bars something like the screen above.
E-MU Systems
Step 8. Ctrl-Click here.
3 - Getting Started
Opening a Preset
37