E-Mu ProteusX Operation Manual page 149

Triggered LFO
LFO Wave
Clock
LFO Trigger causes the LFO to reset each time the clock waveform goes low.
The possibilities of clock modulation and retrigger are numerous and varied. A
repeating six segment curve of any shape can be created by triggering the Filter or
Auxiliary Envelope generators with the clock. A few other possibilities are listed below.
• Turn different voice layers on and off using different clock divisors.
• Create a global triangle LFO by routing the Clock through a Lag Processor.
• Switch between Auxiliary and Filter Envelope retriggering using a slider or footswitch.
• Retrigger LFOs or Envelopes using noise or other LFOs to create random or semi random
effects.
• Modulating the rate of triggered LFOs will alter the LFO waveform.
• Route multiple clocks with different divisors to the same destination (such as pitch) to create
complex patterns. (Hint: Adjust the Cord Amounts.)
Eighth
Note
Quarter
Note
16th
Note
8th
Note
Quarter
Note
E-MU Systems
Added together in
equal amounts produces...
Added together in
unequal amounts produces...
9 - Synthesizer Basics
Clock Modulation
149