Table of Contents
Advertisement
7 - Effects
Programming Effects
Programming Effects
Adding an Aux Effect in the Multisetup
Some banks (Proteus X Composer, for example) are already programmed to use Proteus
X soft effects. These instructions explain how to add Aux Effects to a Proteus X bank
which does not already have soft effects programmed.
The Aux Effects are designed to be used as sidechain effects applied on all presets in the
bank. See the diagram on
How to Add an Aux Effect
Select the Proteus X Studio session in PatchMix DSP.
1.
Close PatchMix DSP
2.
Select the Multisetup Page by clicking the Proteus X icon at the top of the tree.
3.
Locate the Aux Outputs section in the lower right part of the window and set all the
4.
Aux Outputs to EX Main. (This bypasses the PatchMix DSP hardware effects and sets
up the Aux Outs to be used as sidechain effects.)
Click on the Aux 1 button at the top right of the screen if it's not already selected.
5.
The Aux 1 effect appears in the TV screen.
Click on the Effect Select Icon
6.
list of available effects drops down.
Effect Select icon
Select one of the Effects from the list.
7.
Turn up the FXA knob in the MIDI controllers section to hear the effect.
8.
(FXA is usually located on Controller N.)
Change the effect parameters to suit your own taste, or change the entire effect for
9.
that matter. Keep in mind that the changes you make will affect ALL the presets in
the bank.
102
page 104
for a complete description of the effects routing.
at the top right corner of the Effects TV screen. A
PatchMix DSP
f
hardware effects routings
are already programmed
into most Proteus X banks
Proteus X icon
When creating your
E
own presets and banks,
we recommend you
follow the FX routing
model on
page
108.
Proteus X Operation Manual
Advertisement
Table of Contents
