E-Mu ProteusX Operation Manual page 122

Table of Contents

Advertisement

7 - Effects
Effects Descriptions
Parameter
Description
Left Delay Time
Sets the length of the delay for the left channel in milliseconds.
Range: .01 millisecond to 2000 milliseconds
(.01ms. minimum increment between settings)
Right Delay Time
Sets the length of the delay for the right channel in milliseconds.
Range: .01 millisecond to 2000 milliseconds
(.01ms. minimum increment between settings)
Mode
Changes the signal routing of the delay. The four modes are:
Discrete stereo - signal paths remain completely separate.
Ping Pong, stereo - The feedback paths feed the opposite
channel.
Ping Pong, mono L->R - The effected signal is summed to
mono, then fed down the left channel whose feedback path feeds
the right channel. The right channel feedback path feeds the left
channel.
Ping Pong, mono R->L - This is the same as the previous
algorithm except that the L-R channels are reversed.
Feedback
Sets the amount of delayed signal that will be recirculated through
both delay lines. Range: 0% to 100%
HF Damping
High Frequency Damping cuts the high frequency content in the
feedback paths. This causes the echoes to decay naturally away.
Modulation Parameters
Wet/Dry Mix
Feedback
122
Proteus X Operation Manual

Advertisement

Table of Contents
loading

Table of Contents