Block Diagram Of The Effects Routing - E-Mu ProteusX Operation Manual

7 - Effects
Programming Effects
How to Temporarily Disable a Preset Effect
Select the Multisetup Page by clicking the
1.
Proteus X icon at the top of the tree.
Click on the OUTS button on the top left of the
2.
screen. The screen shown at the right appears:
The two rows of buttons marked FXA and FXB
3.
enable or disable the preset effects for each
channel.
Turn the buttons off (grey) for the channels
4.
you are using if you don't want to use the
effects.

Block Diagram of the Effects Routing

Wet/Dry
wet
dry
Main
Voices
per
VOICE
Two effects can be assigned per Preset. Three effects can be assigned per Multisetup. Effects amounts can be controlled at the
voice level or the preset level. Note that since the Main output and Aux 1, 2 & 3 are all connected to the same ASIO output,
they will be MIXED before being sent to the Host application (PatchMix DSP).
104
Post FX
per PRESET
Sends
FX A FX B
Aux 1
Aux 2
Aux 3
FX
Enables
Main
Aux 1
Aux 2
Aux 3
Aux
On/Off
Main
ASIO 1/2
Aux Outputs
ASIO 1/2
ASIO 3/4
Aux 1
FX
ASIO 31/32
ASIO 1/2
ASIO 3/4
Aux 2
FX
ASIO 31/32
ASIO 1/2
ASIO 3/4
Aux 3
FX
ASIO 31/32
per MULTI
Proteus X Operation Manual