Table of Contents
Advertisement
Output View Button
This button allows you to view the Aux Send On/Off, Main Output Routing, and Preset
FXA/FXB Bypass buttons when not in Single Mode. (The button is disabled in Single
mode.)
You may want to bypass the Preset Effects on certain channels in order to free up CPU
power or to hear the presets dry.
Aux FX View Buttons
The buttons above the TV display select which of the three possible Aux Effect is
currently displayed. Note: The Output View button is disabled in Single mode.
Aux Send On/Off
These buttons enable (blue) or disable (grey) the inputs to the Aux Sends for each MIDI
channel. When a factory FX template (such as Proteus X Composer) is used, these
buttons serve to enable/disable the Aux FX for each channel. The Main Output is
unaffected by these buttons.
These buttons disable the Aux Sends whether the Aux FX are being used or not. Please
refer to the diagram on
page 104
path.
Output View
Button
Preset FX
Enable Buttons
Preset FX Enables
These two rows of buttons marked FXA and FXB, enable or disable the preset effects for
each MIDI channel. These work differently than the Aux Send On/Off buttons in that
they bypass the effects instead of turning them on or off. These buttons are useful to
bypass any preset effects which may have been programmed in the preset.
Please refer to
Chapter "7 - Effects" on page 101
output and effects routing.
Select Effect
Click on the Effect Select icon
of available effects drops down. See
page 102
for complete details on how to add aux effects.
E-MU Systems
to see the exact location of this switch in the signal
Aux Effect View Buttons
Main Output
Routing
for detailed information about the
at the top right corner of the Effects TV screen. A list
"Adding an Aux Effect in the Multisetup" on
4 - Multisetup / Global Controls
E
button is only available
when 1-16 or 17-32 is
selected. In Single mode
you can only control the
current channel.
Aux Send
On/Off
The Multisetup
The Output View
47
Advertisement
Table of Contents
