Table of Contents
Advertisement
Adjusting Key Ranges & Fades
The Key map windows contain alphanumeric fields displaying the key ranges of samples
and voices.
Editing the Key Range using the Graphic Display:
• Click and drag the end points of the graphic display to set the high and low key range.
• Hold Ctrl, then click and drag the end points to move the fade range.
Editing the Key Range via the Alphanumeric Fields:
First, place the cursor inside the alphanumeric field and then:
• Type in the desired value.
• Use the +/- keys to increment or decrement the value.
• Use the roller on a roller-type mouse to increment or decrement the value.
• Press and hold Ctrl, and press Alt. A small MIDI connector symbol appears at the bottom of
the window.
Play your MIDI keyboard to set the key position.
Selecting Voices using your MIDI Keyboard
Before you begin: Make sure "IntelliEdit," in the MIDI Preferences, is set to the same
MIDI port as your keyboard.
Press Ctrl+Alt +MIDI Key to select voices from the Voice Processing page. You'll see a
MIDI icon appear in the status bar at the bottom of the window.
The first note played selects all voices that overlap that key. The second note played, if it
is different, selects all voices that overlap the range between the two notes played.
If the same key is pressed repeatedly, and if there are multiple voices assigned to that
note, the selection will cycle through the voices whose ranges overlap that key.
You can see the selected range of keys displayed below the keyboard at the top of the
Voice Processing window.
Voice Processing Graphic Keyboard Operation
The Voice Processing window has a small keyboard at the top. Clicking the keyboard
will play the clicked note. The range bar below the keyboard shows the range of all
selected voices. You can change the voice selection by simply dragging the ends of the
bar.
E-MU Systems
Click & Drag
8 - Controls
Adjusting Key Ranges & Fades
137
Advertisement
Table of Contents
