Aeotec Smart Switch 7 ZWA023 - Smart Socket Manual

Used in this guide

Note: QR Code used for SmartStart inclusion. DSK Code can be found on packaging. Do not remove or damage them.

Important safety information

Please read this and the online guide(s) at support.aeotec.com/ss7 carefully. Failure to follow the recommendations set forth by Aeotec Limited may be dangerous or cause a violation of the law. The manufacturer, importer, distributor, and / or reseller will not be held responsible for any loss or damage resulting from not following any instructions in this guide or in other materials.

Smart Switch 7 is intended for indoor use in dry locations only. Do not use in damp, moist, and / or wet locations.

Quick start

The following will step you through installing Smart Switch 7 and connecting it to your Z-Wave^TM network.

1. Plug Smart Switch 7 into a power outlet; its LED will flash blue slowly.
2. To connect Smart Switch 7 to your automation network:
   1. If your Z-Wave gateway supports SmartStart, scan Smart Switch 7's QR Code using your gateway's app. Once scanned, Smart Switch 7 will join your Z-Wave network automatically within 10 minutes.
   2. Else, set your gateway into its 'add device' mode. Refer to its manual if you are unsure of how to perform this step.
      Then press Smart Switch 7's Action Button 2x times within 1 second; its LED will blink to indicate pair mode.
   3. If your gateway supports S2 security, and you want your device to use this higher level of security, please enter the first 5 digits of the DSK into the gateway's interface when prompted. Refer to the gateway's manual if you are unsure how to perform this step. Do not lose the DSK or remove it from the product or package.
3. When Smart Switch 7 successfully joins your Z-Wave network, its LED will become a solid blue for 2 seconds. Should its LED still flash blue, this indicates it was unable to join your Z-Wave network; repeat the above steps and please contact us for further support if needed.

Smart Switch 7 is now a part of your Z-Wave home control system. You can configure it and its automations via your Z-Wave system; please refer to your software's user guide for precise instructions.

Get help & learn more

Should you encounter any problem with Smart Switch 7, visit support.aeotec.com/ss7 or contact our support team via aeotec.com/contact. You can also learn more about Smart Switch 7 features, configuration options, and technical specifications at the link.

Gateway compatibility

To see if this device is known to be compatible with your Z-Wave gateway, please refer to aeotec.com/z-wave-gateways.