Compass C-PILOT EVO User Manual page 83

C-Pilot PRO
Choose the MLR protocol in the serial-connection page (see page 20);

Connect C-Pilot EVO to your PC via the serial cable (not provided);

On your PC, start the program that you want to use to download the log (GPSdump,

CompeGPS,...), and set it up in order to use the MLR protocol;
On your PC, start the track transfer.

Also in this case, the points transferred will be a subset or all of those stored in the log depending on
the "fast export" setting.
Note: if you start the transfer while C-Pilot EVO is not in the track-log page, the last
flight log will automatically be transferred. Otherwise, C-Pilot EVO will send the one
selected in the list (see Figure 41).
BlueTooth transfer
The BlueTooth connection is quite fast and convenient. First of all, you have to pair your PC and C-
Pilot EVO (you have to do this only once on your PC). During this operation, you will be asked to
enter the password (or, equivalently, the pin code) of the device on your PC. You can find the
password in the BlueTooth settings page (see page 20).
After the pairing is complete, on your PC you will find two new serial (COM on Windows systems)
ports: incoming and outgoing.
Now you just have to configure your flight-analysis software on your PC (GPSdump, CompeGPS ...)
as for a normal serial connection, using the new outgoing port. When you start the track transfer, a
BlueTooth connection will automatically be created (C-Pilot EVO will display an alert message) and
the track will be transferred.
Please note that it is not necessary that the flight-analysis software on the PC support the BlueTooth
interface to use it: it just has to support serial communications.
Also in this case, the points transferred will be a subset or all of those stored in the log depending on
the "fast export" setting.
User manual
79
Compass s.r.l.