Compass C-PILOT EVO User Manual page 37

C-Pilot PRO User manual Compass s.r.l.
Figure 20: choice of the task type
In race-to-goal competitions the race start time is the same for all the pilots and coincides with the
start opening time. In elapsed time, the start time is individual and corresponds to the time at which
the pilot validates the start waypoint. In Clock start mode there are multiple start gates at
predefined intervals.
When the task is complete, you can have it shown on a cartographic map. From "task menu" select
"show on map". C-Pilot EVO will show the current task, including waypoints, cylinders, optimised
path and goal line.
In order to inspect the details of the task, such as glides, cylinder positions, and so on, you can pan
or magnify the map by using the map controls, just with your finger. This innovative feature is made
possible by the C-Pilot EVO hi-res, colour display with touch panel.
The "task menu" offers several additional functions:
Start navigation: initiate the navigation of the current task and go back to the navigation page.
While flying, C-Pilot EVO will manage all the details of the task navigation autonomously, allowing
the pilot to concentrate on flying and on the task strategy.
Load task: allows you to load a previously stored task.
Rename task: modifies the name of the current task.
Load CompeGPS route: imports a route file (CompeGPS file with .rte extension) from the "routes"
folder in the USB memory and converts it into a task.
When a task or a go-to is active, the "task menu" button is replaced by "stop task" or "stop goto"
that you can use to stop the task or the go-to.
Let us suggest you to practice by creating some demo tasks in order to get to know as well as
possible the user interface of C-Pilot EVO before flying.
Task-To-Go
By means of this new feature, Task-To-Go, made possible by the touch-panel-based user interface
of C-Pilot EVO, you will be able to insert or modify the task waypoints directly from the map.
33