Compass C-PILOT EVO User Manual page 79

C-Pilot PRO
Below the list, you will find some indicators showing the amount of memory available. They refer to
the internal or USB memory depending on which one is shown.
To select a track log, simply touch it. Then you will be able to perform the following actions by
means of the buttons on the right:
Delete: deletes the selected track log. Deleted track logs can not be recovered.

Show on map: shows the selected track log on the map.

Export IGC: convert the track log into an IGC file with

digital signature (G-record) and store it in the USB memory
or in the Sd Card memory, ready to be copied to your PC.


Simulation: simulate the selected log. You will be shown

the navigation window and the flight log will be reproduced. During the simulation, the GPS
icon in the navigation bar is replaced by a "play" button:
Pressing the "play" button, you are shown the simulation-control buttons:
From left to right you will find:
Stop the simulation;

Play/Pause;

Jump back of approximately five minutes;

Sliding cursor. It allows you to find a precise point of the flight. The number indicates

the time of the current point in percentage with respect to the total duration.
Jump forward of approximately five minutes;

Simulation-speed control. When pressed, a list allows you to choose from very slow to

very fast;
Back to the navigation bar without stopping the simulation.

Info: this page shows a summary of the last or current task. It is updated continuously, so you

can consult is also while flying. It displays the following data:
Start arrival time: the time when the start pylon was crossed.

Start validation time: in elapsed-time tasks this time coincides with the time that you

have validly entered into (or exited, depending on the kind of start) the start pylon. In race-
User manual
75
Compass s.r.l.