Bluetooth GPS Receiver Model: GB621 Before You Start Quick Installation Guide Your new COMPASS Bluetooth GPS allows you to turn any Bluetooth™ enabled PDAs (Pocket PC) or PCs into a GPS Navigation System using Bluetooth Technology. Bluetooth GPS Receiver Model: GB621 1.
Page 2
LED indicator that is named LED1. The second is GPS & Charge status LED that is named LED 2. The third is Bluetooth status LED that is named LED 3. The status table of LED shows as follows: GB621 Quick Installation Guide v.1.0 GB621 Quick Installation Guide v.1.0...
Page 3
“I” . The green LED (LED 2) position indicator will steady on for searching GPS satellites. The left blue LED (LED 3) indicator will start flashing for searching Bluetooth device. GB621 Quick Installation Guide v.1.0 GB621 Quick Installation Guide v.1.0...
Page 4
Note: In “Bluetooth: Device Pairing” window you will required to enter the Passkey number 0000 when opening the port in your GPS program. Tap where indicated to choose a device. And select the picture marked “BT GPS” to continue GB621 Quick Installation Guide v.1.0 GB621 Quick Installation Guide v.1.0...
Page 5
The PDA will begin retrieving services as shown above In the future, you may establish the connection from the shortcut, “BT GPS: GPS OUTPUT” Select “GPS OUTPUT” and tap Next GB621 Quick Installation Guide v.1.0 GB621 Quick Installation Guide v.1.0...
Page 6
Technical Support If you have any questions or problems installing the Bluetooth GPS, please contact Technical Support. Hours: Weekdays 9 a.m. ~ 6 p.m. Taiwan http://www.navibe.com E-mail: service@cpss.com.tw GB621 Quick Installation Guide v.1.0...
Need help?
Do you have a question about the GB621 and is the answer not in the manual?
Questions and answers