Compass C-PILOT EVO User Manual page 64

Compass s.r.l.
The "airspace menu" button gives access to the functions shown in Figure 29:
Open file: allows adding to the list new airspaces from a file stored in the USB memory. C-

Pilot EVO is compatible with the OpenAir
contained in the "Airspaces" folder of the USB. Choose the one that you want to load. You
can load several files consecutively.
Save file: saves the airspaces in use in an OpenAir

USB memory.
Delete all: deletes all the airspaces in use. Files in the "Airspaces" folder of the USB

memory will not be deleted.
Delete by class: you will be shown a list of all the classes in use. Select the one that you

want to delete and press "ok". Files in the "Airspaces" folder of the USB memory will not be
deleted.
Delete airspaces not shown in map: in the navigation page, use the zoom and panning

map controls to show your flight region. Selecting "Delete airspaces not shown in map" all
the airspaces not shown in the map will be removed from the list Files in the "Airspaces"
folder of the USB memory will not be deleted. This command helps you in organising the
airspaces in smaller files, keeping only those in your flight area. Airspaces selected in this
way can then be saved in a file, ready to be used again later.
Enable currently disabled alarms: active alarms can easily be disabled while flying by

touching the map (see below). This button reactivates all the disabled alarms.
By means of the buttons on the left of the list you can delete, edit or show in a map the airspace
selected from the list. It is also possible to add new airspaces.
Drawing options and proximity alarms
The "setup" button allows configuring the map drawing options and the proximity alarms (Figure 30).
User manual
Figure 29: airspace management menu.
TM
60
format. You will be shown a list of the files
TM
file, in the "Airspaces" folder of the
Errore. Lo stile non è definito.
C-Pilot PRO