Compaq 5525B/31/32 User Manual page 76

Chapter 5
Novell Host Configuration
npsh unitname command
Initiates a single Command with guest access only to the unit instead of
entering into a complete session.
To communicate with the unit using npsh.exe:
1. From a DOS prompt on a Novell workstation, begin an npsh session
with the unit.
npsh unitname
Starts a Telnet-like session with the named print server with guest
access only.
2. To obtain root access to the unit, type:
supervisor
A standard login screen is displayed prompting you for the login name
and password.
3. Login to the unit as root user.
root
NOTE: Root users require the use of a password as configured in the
4. Enter the password. If this password is not yet set, press enter at the
password prompt. Otherwise, enter the password that is already
stored in the unit.
password
You are now logged in to the unit as a root user and can access any npsh
command on the unit.
NOTE: Because npsh.exe makes use of broadcasts, you may have
76
unit user list.
problems communicating across a router.