Compaq 5525B/31/32 User Manual page 130

Chapter 10
Factory Settings
Firmware Panic
Flash
FTP
Hardware Exception
HTML
ifnum
interface script
I/O port
IP Address
LAN
LED
130
S2 jumper position stating all factory default
settings are to be used while the PrintNet is up
and running.
Unrecoverable errors detected by the PrintNet
firmware force the Print Server into Firmware
Panic mode. Manually reset the PrintNet to
resume operation.
Stores firmware code and configurable settings.
Allows for upgrades without replacing hardware
inside the PrintNet.
File Transfer Protocol. Used for transferring files
from one TCP/IP host to another and used in the
upgrade process.
Buss errors, address errors, and illegal
instructions force the PrintNet into this non-
operational mode.
HyperText Markup Language. Format used for
documents viewable on the World Wide Web.
Interface Number. Represents the network
interface. With a PrintNet, this will always be "1"
for Ethernet.
Unix host filter file that processes the print job
before it is sent over the network to the PrintNet.
Port for attaching peripherals to. The PrintNet
provides four: PRN1, PRN2, COM1, COM2.
The Internet Protocol Address. A numeric
address such as 123.45.61.23 which identifies a
printer or server in a LAN or WAN.
Local Area Network.
Light Emitting Diode. The printer has an LED
display which shows the status of the printer to
the operator.