Compaq 5525B/31/32 User Manual page 102

Chapter 8
Complete Command List
store pserver tcpsocket TCPportnumber port
newTCPportnumber
store pserver tcpsocket 4000 port 5000
Change a pre-defined TCPportnumber on the PrintNet to a
newTCPportnumber . The default number is 9100 for prn.
store pserver tcpsocket TCPportnumber dest destination
store pserver tcpsocket 5000 dest d1prn
Assign a pre-defined TCPportnumber to a particular destination on
the PrintNet. Therefore, if you are using a print method that sends
jobs directly to a TCP port number, you still have the option to
process the job data through this destination setting.
store pserver novell passwd password
store pserver novell passwd mplex
Store the password for the PrintNet to use when logging in to a
Novell file server. This password would have to match one set on the
file server.
store pserver novell user name username
store pserver novell user name micro1
Define a username on the PrintNet to be used when it logs into a
Novell file server to find information. This username must match a
user pre-defined on the Novell file server.
store pserver novell user passwd password
store pserver novell user passwd mplex2
Define a password on the PrintNet for the Novell user already
defined. This password must match the one stored on the Novell file
server. Passwords are optional as long as there is not one defined on
the file server for the user.
store pserver novell fserver add|del fileservername
store pserver novell fserver add fs1
Add or remove a server entry on the PrintNet for the Novell file server
it will be servicing.
102