Compaq 5525B/31/32 User Manual page 103

store pserver smb workgrp newworkgroupname
store pserver smb workgrp eng
Define a different Windows workgroup as defined by
newworkgroupname for the PrintNet to be visible within. By default,
the print server only comes up within the group called
"WORKGROUP."
store pserver from default
Set all general print server settings back to factory defaults.
store pserver from current
Store all current general print server settings to flash memory so they
are retained after a power cycle. This ensures all current settings
match what is stored in flash memory.
store rprinter add|del printservername
destination
store rprinter add pserver1 0 d1prn
Add or delete the RPRINTER settings on the PrintNet for a Novell
environment. The printservername must be the name of an existing
PSERVER.NLM on your Novell file server. The printernumber is the
printer number within this PSERVER.NLM. The destination is the
queue on the PrintNet where the print jobs will be sent to.
store tcpip ifnum addr IPaddress
store tcpip 1 addr 192.75.11.9
Store the IP address for the PrintNet.
store tcpip ifnum mask netmask
store tcpip 1 mask 255.255.255.0
Store the subnet mask for the PrintNet.
store tcpip ifnum opts [[-]rarp] [[-]bootp]
store tcpip 1 opts -rarp -bootp
Enable or disable the automatic RARP and BOOTP requests for IP
addresses upon bootup. If you are storing the PrintNet TCP/IP
network settings within the device, you will not need to rely on RARP
or BOOTP for new settings.
store Commands
printernumber
103