Compaq 5525B/31/32 User Manual page 124

Chapter 9
Printer Monitoring and Logging
To view the current logpath settings on the print server:
1. Load a Web browser on a network station that can communicate with
the print server over TCP/IP or using Telnet (e.g. Telnet "ipaddress").
The command to view the logpath settings is:
NOTE: If prompted for a "User ID" and password first, type in "
Syntax:
list logpath
2. Direct your Web browser to URL
"
(e.g. "
NOTE: If prompted for a "User ID" and password first, type in "
3. At the "Print Path Configuration" HTML form that displays, select a
destination link (e.g. d1prn) from the top of the page to bring up the
appropriate destination form.
4. Once the desired destination HTML form displays, scroll down to the
"Logpath Type" and "Logpath Port" sections to view the current
logpath settings for this particular destination.
At this point, you can alter any of these settings and then click on the
SUBMIT button to store them into the PrintNet. Remember to repower the
PrintNet to make the settings take effect.
124
the ID and press ENTER at the password prompt since there is
no password by default.
http:// PrintNetIPaddress /destConf.html
http://192.75.11.9/destConf.html
the ID and press ENTER at the password prompt since there is
no password by default.
root " for
"
").
" for
root