Compaq 5525B/31/32 User Manual page 118

Chapter 8
Complete Command List
ping [-s] hostIPaddress [ datasize [ packetnumber ]]
ping 192.75.11.30
"
PrintNet network. datasize is the datagram packet size which
defaults to 64 bytes if no size is included in the syntax and
packetnumber is the number of requests to be sent.
NOTE: To use a host or IP name instead of the address, you must have
telnet hostIPaddress [ escapecharacter ]
telnet 192.75.11.35
Start a Telnet session with another TCP/IP host specified by
hostIPaddress on the PrintNet network. If escapecharacter is used,
it resets the key sequence used to exit the Telnet session. It will
return you to the telnet> prompt where you can execute " quit ". Use
the " keycode " command to find out exact escape characters if
needed. The default character is CTRL-].
NOTE: To use a host or IP name instead of the address, you must have
chr string
Echo string or redirect string to an I/O port using "
ioport
keycode
Determine the hexadecimal value for a key to be used as the escape
character with the PrintNet built-in "
118
" another TCP/IP host specified by hostIPaddress on the
ping
set the DNS server on the PrintNet. Use the command "set
sysinfo dns..." to do this.
set the DNS server on the PrintNet. Use the command "
" to do this.
sysinfo dns...
" .
set
chr string >
telnet " command.