Compaq 5525B/31/32 User Manual page 117

start fox|tts|loopb prn
start fox prn
Begin a debugging test on one of the I/O ports on the PrintNet. The
tests available are:
fox A continuous stream of text sent to the attached
printer. This is a good test for troubleshooting
hardware as long as the attached printer supports
text output.
tts A continuous stream of Gandalf 400C TTS-
compatible text sent to the attached printer.
loopb Loopback test. Any input characters from the device
attached to the I/O port is echoed back.
stop prn
stop prn
Stop an output test on an I/O port.
disable ioport | destination
disable prn
Disable an I/O port so that queued jobs are not printed, or disable a
destination so jobs can not be queued to it.
enable ioport | destination
enable prn
Enable an I/O port so that queued jobs are printed, or enable a
destination so jobs can be queued to it.
close tcp TCPindexnumber
close tcp 3
Force a TCP/IP connection between a TCP/IP host and the PrintNet
to close. The TCPindexnumber can be retrieved from "debug tcp"
output.
Miscellaneous Commands
117