Compaq 5525B/31/32 User Manual page 106

Chapter 8
Complete Command List
set dest destination name newname
set dest d1prn name laser
Change the current name of the destination to a new name as
indicated by newname . This newname must be nine characters or
less or it will be truncated. These names are case sensitive.
set dest destination backchannel prn [prn]
set dest d1prn backchannel prn
Establish a return path for printer feedback for a given destination .
Since the PrintNet I/O port is bi-directional, however, you will most
likely use the same I/O port that the destination is currently sending
jobs to.
set dest destination model modelname
set dest d1prn model m4
Associate a model with a destination. Jobs sent to the named
destination are processed according to the options defined in the
named model.
set dest destination logpath logpathname
set dest d1prn logpath l4
Associate a logpath with a destination. Jobs sent to the named
destination are logged according to the settings defined in the
named logpath.
set dest destination service [[-]socket][[-]lpd]
[[-]lpsched] [[-]rprinter] [[-]pserver] [[-]netbios]
[[-]ftpd]
set dest d1prn service -netbios
Set the destination to handle only certain print services. To add a
service, specify the service name. To disable a service, use "
before the name. The available services are:
socket
lpd
lpsched
rprinter
pserver
106
Direct socket printing via TCP/IP.
LPR printing with TCP/IP including LPR clients on
any platform.
LP or System V printing with TCP/IP.
Novell RPRINTER support.
Novell PSERVER support.
"
-