Table of Contents
Advertisement
HX2560 M1/HX2560 M2
Dedicated IPMI LAN Port LEDs
A dedicated IPMI LAN port is also located on
the I/O backplane. The amber LED on the
right indicates activity, while the green LED
on the left indicates the speed of the connec-
tion. Please note that the IPMI LAN does not
support 1Gbps connections. See the table at
right for more information.
Onboard Power LED
An Onboard Power LED is located at LE1. This
LED Indicator is on when the system is on.
Be sure to unplug the AC power cable before
removing or adding any components. See the
table on the right for more details.
Rear UID LED
The rear UID LED is located at LE4 on the
backplane. This LED is used in conjunction
with the rear UID switch to provide easy
identification of a system that might be in
need of service.
BMC Heartbeat LED
The BMC Heartbeat LED is designated DM1.
When DM1 is blinking, the BMC (Baseboard
Management Controller) is functioning
normally. See the table at right for more
information.
User's Manual
5-18
IPMI LAN LEDs
Color/State
Link (Left)
Green: Solid
Activity
Amber: Blinking
(Right)
Onboard PWR LED Indicator
LED Color
Definition
Off
System Off (power cable
not connected)
Green
System On
Green:
ACPI S1 State
Flashing
Quickly
UID LED
Status
Color/State OS Status
Blue: On
Windows OS
Blue:
Linux OS
Blinking
BMC Heatbeat LED Indicator
LED Status
Green: Blinking
BMC: Normal
Definition
100 Mbps
Active
Unit Identified
Unit Identified
Advertisement
Table of Contents
