Table of Contents
Advertisement
Preface
Manual Organization
Chapter 1: Introduction
The first chapter provides a checklist of the main components included with the server
system and describes the main features of the serverboard and the 2U rackmount server
chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the system into a rack and check
out the server configuration prior to powering up the system. If your server was ordered
without the processor and memory components, this chapter will refer you to the ap-
propriate sections of the manual for their installation.
Chapter 3: System Interface
Refer to this chapter for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs located
throughout the system.
Chapter 4: System Safety
You should thoroughly familiarize yourself with this chapter for a general overview of
safety precautions that should be followed when installing and servicing the system.
Chapter 5: Advanced Serverboard Setup
Chapter 5 provides detailed information on the serverboard, including the locations and
functions of connectors, headers and jumpers. Refer to this chapter when adding or
removing processors or main memory and when reconfiguring the serverboard.
Chapter 6: Advanced Chassis Setup
Refer to Chapter 6 for detailed information on the 2U rackmount server chassis. You should
follow the procedures given in this chapter when installing, removing or reconfiguring
SATA or peripheral drives and when replacing system power supply units and cooling fans.
Chapter 7: BIOS
The BIOS chapter includes an introduction to BIOS and provides detailed information on
running the BIOS Setup Utility.
Appendix A: Cabling
Appendix B: BIOS POST Error Codes
Appendix C: System Specifications
v
Advertisement
Table of Contents
